NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND2110-100NAS unable to map network drive in Windows 10
I have a ReadyNas (RND2110-100NAS). I have not been able to open any files stored in it from my Windows 10 laptop since three weeks ago. It is visible from RaidAir, I can access the set up UI but whe...
It turns out my laptop needed to update to the latest Windows 10, after the update I am now able to access the ReadyNas.
anThank you for your reply, SMB Client 1 is enabled. I ran the CMD as instructed and go the following messages:
Please let me know if you have any other suggestions.
Thanks
Giuseppe
net use * /delete /y There are no entries in the list.
net use t: \\192.168.0.229\C /user:admin USEDMYPASSWORD The network path was not found.
Does RAIDar confirm that the IP address is, in fact 192.168.0.229? Have you made any other changes regarding network configuration?
Thank you for jumping in Sandshark! Yes RAIdar confirms that 192.168.0.229 is the right IP address. Also this is the IP address I use to connect to ReadyNas using my Mac. The problem is my Windows machine, I did not make any change regarding network configuration, this happened all of sudden.
Coco2021 wrote:
RAIDar confirms that 192.168.0.229 is the right IP address.
Is your NAS admin password the factory default (netgear1)? If it is, you'll need to change the password for that command to work.
It turns out my laptop needed to update to the latest Windows 10, after the update I am now able to access the ReadyNas.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
