NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND2150 Disk Tray Struck
I have an older NAS RND2150 (2009 vintage). I recently lost a disk and found out my disk tray is stuck. This is the older style disk tray where the release is an indented circular button. Both trays do not respond to pushing in the circular release button.Any suggestions on how to release the tray from the chassis? Thanks.
Thanks. The 2nd method worked like a charm. I had to shine a light on it to see the plastic peice that needed to move.
2 Replies
Replies have been turned off for this discussion
There are two possible ways. One is to try inserting a bent paperclip into the hole in the center of the button.
If that fails, you can also insert a small screwdriver or bent paperclip into one of the "B" slot(s) as shown below. There is plastic piece behind those slots (marked in cyan in the picture) that you push towards the button to release the latch. FWIW, I've had better luck using the second method.
Thanks. The 2nd method worked like a charm. I had to shine a light on it to see the plastic peice that needed to move.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
