NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000-100eus - no shares available and admin page not available
Hi all I'm new here and fairly new to the world of NAS. Bought this NAS from a collegue and it has been working fine for a year now. The other day I couldn’t access the shares on the NAS from my ...
Hi CGB55,
We appreciate your feedback and for letting us know that everything has been taken care of. You may now mark this thread closed by clicking the “Accept as Solution” button and we also look forward to hearing more questions, suggestions and tips from you in the future.
Kind regards,
BrianL
NETGEAR Community Team
Thanks for reply StephenB
SSH was not enabled as far as I remember and a port scan does not show port 22 available.
Have now tried having it re-install its OS by holding the power switch with re-set button pressed but this caused a message saying the os was bad after a re-boot.
next was to re-install the os from a USB which I have done and now with the disks back in it boots - RAIDar says it’s OK and the activity light is flashing (hopefully just a re-sync) but no shares or Admin page still.
Hoping that after the sync finishes (10 hours I think) it might allow access again – does re-sync prevent access to admin page?
Regards
CGB55
CGB55 wrote:
Have now tried having it re-install its OS by holding the power switch with re-set button pressed but this caused a message saying the os was bad after a re-boot.
next was to re-install the os from a USB which I have done and now with the disks back in it boots - RAIDar says it’s OK and the activity light is flashing (hopefully just a re-sync) but no shares or Admin page still.
Hoping that after the sync finishes (10 hours I think) it might allow access again – does re-sync prevent access to admin page?
I don't think what you did will fix a filling OS partition, unless you accidently did a factory reset (which will cost your data). Hopefully I'm wrong.
Do you have RAIDar installed on a PC? It will often provide the status even when the admin ui is non-reponsive.
Generally I like the old version (4.3.8) with the old NAS - that is here: http://www.downloads.netgear.com/files/ReadyNAS/RAIDar_Win_4_3_8.exe
When I installed the OS from USB I had removed the disks to protect them!
The older version of RAIDar show everything happy
raid level x 10% used
all 4 disks are green with temperatures betweem 33° and 38° (91 to 100 °F)
Fan doing 20000 rpm
and main box temp at 33°c/91.4°F
Wonder what protocol RAIDar uses to talk to the device?
CGB55
CGB55 wrote:
Wonder what protocol RAIDar uses to talk to the device?
UDP broadcast (of course the message format itself is proprietary).
OK so I have taken all 4 disk out and laid to one side (labled :)). I have 2 more disk that I have placed in slots 1 & 2 powered up and RAIDar says it’s all happy with the status as initialising Disks. Should the admin page be available whilst in this state as its not?
Cheers
CGB55
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
