NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000-100eus - no shares available and admin page not available
Hi all I'm new here and fairly new to the world of NAS. Bought this NAS from a collegue and it has been working fine for a year now. The other day I couldn’t access the shares on the NAS from my ...
Hi CGB55,
We appreciate your feedback and for letting us know that everything has been taken care of. You may now mark this thread closed by clicking the “Accept as Solution” button and we also look forward to hearing more questions, suggestions and tips from you in the future.
Kind regards,
BrianL
NETGEAR Community Team
When I installed the OS from USB I had removed the disks to protect them!
The older version of RAIDar show everything happy
raid level x 10% used
all 4 disks are green with temperatures betweem 33° and 38° (91 to 100 °F)
Fan doing 20000 rpm
and main box temp at 33°c/91.4°F
Wonder what protocol RAIDar uses to talk to the device?
CGB55
CGB55 wrote:
Wonder what protocol RAIDar uses to talk to the device?
UDP broadcast (of course the message format itself is proprietary).
OK so I have taken all 4 disk out and laid to one side (labled :)). I have 2 more disk that I have placed in slots 1 & 2 powered up and RAIDar says it’s all happy with the status as initialising Disks. Should the admin page be available whilst in this state as its not?
Cheers
CGB55
CGB55 wrote:
OK so I have taken all 4 disk out and laid to one side (labled :)). I have 2 more disk that I have placed in slots 1 & 2 powered up and RAIDar says it’s all happy with the status as initialising Disks. Should the admin page be available whilst in this state as its not?
The last time I did this (a few months ago) my NV+ wasn't available for a while, but became available before the RAID resync was finished.
So I'd leave it for now.
OK so eventually the NAS came back (took something over 5 hours with 2 new 750GB disks) and all seems to work fine however the original 4 disk still display the same issue so I will re-install the os once more then it will be a factory re-set and goodbye data :( - unless anyone has a last minute solution to offer?
Thanks for comments to date
Regards
CGB55
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
