NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000v2 - RND4000 NV+ v2 - Readynas Wont Switch On Boot Up
Hello All, I am hoping for some guidance here. I have a Readynas NV+ v2 that wont switch on or boot up. The power supply has a green light indicator on the inline transformer brick and there...
Detritusuk wrote:
Lets be clear too, that the main aim is to get the data off that's required from the drives. Configured as Flex Raid. 4 disks and single hard drive redundancy.
It should be possible to mount the RAID array manually in an x86 linux system.
You can also use RAID recovery software in a PC - R-Studio would work. You'd want the $79.99 version.
Note you can see if the software can access your data before purchase.
Detritusuk wrote:
Lets be clear too, that the main aim is to get the data off that's required from the drives. Configured as Flex Raid. 4 disks and single hard drive redundancy.
It should be possible to mount the RAID array manually in an x86 linux system.
You can also use RAID recovery software in a PC - R-Studio would work. You'd want the $79.99 version.
Note you can see if the software can access your data before purchase.
Thanks StephenB - that works for me, I had concerns that if I tried to put them in a separate linux build there might be a proprietary element preventing me from doing so. Or worse, attempting to retrieve the data could assume a new build and completely flatten the volume / storage pool.
Thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
