NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RNDP6610 HDD release catch
Hi All, This may sound silly but our readynas needs a HDD replacing and I cant get the hotswap drive out. The release catches appear to be covered with a circluar piece of plastic - they are not rec...
It's not silly, its a flawed older tray design.
There are two options:
One is to push a stiff paperclip or a pushpin into the hole in the center of the button ("A" below).
If you look through the slots at "B" (flashlight might be needed) you can see a release that you can also slide with a stiff paperclip or a small screwdriver. That often works better.
There is also a youtube that might be helpful:
It's not silly, its a flawed older tray design.
There are two options:
One is to push a stiff paperclip or a pushpin into the hole in the center of the button ("A" below).
If you look through the slots at "B" (flashlight might be needed) you can see a release that you can also slide with a stiff paperclip or a small screwdriver. That often works better.
There is also a youtube that might be helpful:
Hello sygenltd,
Here's the YouTube link: https://www.youtube.com/watch?v=zKczCPiqc-4
The disk trays with round button are the old disk trays, rectangular ones were made because of the stuck issue.
We hope this helps, let us know.
Welcome to the community!
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
