NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Samba doesn't work anymore
Hello, pals! Today i'd face the problem with samba on my RN104. After turning the server off and that turned it on everything seemed ok unless i couldn't reach the server via samba. When i tryed to ...
Dear Skywalker!
Thank you for help and response. Actually, i tryied to reinstall samba, meditated on logs but finally made OS Reinstall and that helped. So i can not try your advise but anyway thank you!
Well, I can't tell how it happened, but I can tell you how to fix it. These two commands should take care of it:
# rm /usr/lib/arm-linux-gnueabi/libwbclient.so.0.13 # ldconfig
Dear Skywalker!
Thank you for help and response. Actually, i tryied to reinstall samba, meditated on logs but finally made OS Reinstall and that helped. So i can not try your advise but anyway thank you!You'll probably want to still run that `rm` command anyway. Otherwise, it may revert to a non-working state if you install an app or some other package that includes a new library.
UPD!!!
As i wrote before i made OS Reinstall and after it was done at the first reboot Samba starts properly. But after that i made next reboot and the problem accure again.There is a quote from console:
Spoilerroot@vsa_moscow:~# rm /usr/lib/arm-linux-gnueabi/libwbclient.so.0.13
root@vsa_moscow:~# ldconfig
/sbin/ldconfig.real: libraries libsnapper.so.2.1.0 and libsnapper.so.2.5.0 in directory /usr/lib/arm-linux-gnueabi have same soname but different type.
/sbin/ldconfig.real: /usr/lib/libreadycloud.so.1 is not a symbolic linkThat shouldn't cause a problem. Samba should start normally now.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
