NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Seagate ST31500341AS 1.5TB
Any idea when this will be supported :-) Cliff
I have 6 of these drives in my Pro. I've purchased them with SD17 and experienced the hanging drive problem, so I upgrade them to SD1A. Yesterday I made another upgrade (to prevent drive loss after power down) and run SD1B now. I've experienced many errors (see below) and lost my confidence to either the drives and also to seagate support (both are extremely poor). Some drives are showing many Spin up retries, reallocated sectors, ATA-Errors, High-Fly Writes, and intermediately also Offline uncorrectables.
Only two out of my six drives are relatively error free.
My worst drive actually shows:
Model: ST31500341AS
Serial: 9VS0B5S5
Firmware: SD1B
SMART Attribute
Spin Up Time 0
Start Stop Count 145
Reallocated Sector Count 19
Power On Hours 2044
Spin Retry Count 0
Power Cycle Count 48
Reported Uncorrect 12
High Fly Writes 57
Airflow Temperature Cel 39
Temperature Celsius 39
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
ATA Error Count 12
-->> So let's check out the new WD 2TB Drives :-)
Only two out of my six drives are relatively error free.
My worst drive actually shows:
Model: ST31500341AS
Serial: 9VS0B5S5
Firmware: SD1B
SMART Attribute
Spin Up Time 0
Start Stop Count 145
Reallocated Sector Count 19
Power On Hours 2044
Spin Retry Count 0
Power Cycle Count 48
Reported Uncorrect 12
High Fly Writes 57
Airflow Temperature Cel 39
Temperature Celsius 39
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
ATA Error Count 12
-->> So let's check out the new WD 2TB Drives :-)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
