NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Sigh! SMB shares can't enable on my RN314
My ReadyNAS 314 has just started to be inaccessible via SMB. AFP works fine from my Mac, but my Windows Media Centre cannot connect to the SMB shares any more. Not sure how long this has been going on for, could be as long as a couple of weeks.
I try to enable SMB from the Services section in Settings and it just won't work. I have bounced the ReadyNAS a couple of times to no avail.
I'm running the latest firmware 6.9.3. No other changes have taken place, it has just stopped serving up SMB.
It's a real gutsache ... anyone know how to help me without taking the "Factory Reset" hammer to it?
-Dan
OK, so I managed to restore my SMB service. I downgraded my firmware to 6.9.2 to see if that would do anything. Nope (just a few crypitic errors in the console). So I upgraded back to 6.9.3 and viola.
I can turn on SSH now too.
5 Replies
Replies have been turned off for this discussion
Doing a community search for "SMB disabled" is bringing up lots of threads dealing with the same problem and there is no panacea for the reported trouble. Except factory reset of course :-)
The following link to me looks the most promising trying not to use the big hammer. Good luck.
That link seems to refer to a full root disk. Mine has 2.5G free. :-(
A filling OS partition can cause this (and was the cause in the thread Retired_Member links to) - but with newer OS-6 releases you should see some alerts telling you that the OS partition is getting full. So perhaps look for those.
If the OS partition is filling, then it is possible to clean it yourself if you are comfortable using linux shell commands.
It you aren't experienced with linux shell, then the best way to avoid the "hammer" is to use netgear support (my.netgear.com). They can resolve this for you (including rebuilding your SMB configuration). They won't support used NAS though.
If you purchased the NAS between 1 June 2014 and 31 May 2016 then you have lifetime chat support via my.netgear.com. Otherwise, you would need to pay. Ask for per-incident support, it should be sufficient for this.
OK, so I managed to restore my SMB service. I downgraded my firmware to 6.9.2 to see if that would do anything. Nope (just a few crypitic errors in the console). So I upgraded back to 6.9.3 and viola.
I can turn on SSH now too.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
