NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Slow access to Readynas after upgrade to 6.9.x (Admin page, SMB etc)
Hi there,
I upgraded to 6.8 and 6.9 a while ago but since I noticed performance slowdowns I went back to 6.7.5, which is IMHO a very stable release. Versions 6.8. and 6.9. (all availavle sub-versions) show the following:
Slow SMB-mounting (when booting Win or OSX-machines)
Slow SMB-access to the shares, sometimes stuck in the middle, showing "the watch"
Very slow access to the admin page (sometimes up to 2 minutes)
Sometimes navigating/updating settings in the admin page crashes, leaving you with the "reconnecting" page
OSX-specific: in the finder window then NAS should show as 2 devices: NAS (SMB) and NAS (AFP), but in fact it does show
as NAS and NAS (AFP), and you cannot connect to it when you click the "NAS" entry.
After downgrading to 6.7.5 everything is fine and in OSX the device NAS (SMB) is there as expectes and i can connect to it by clicking its name.
I have checked various client systems (OSX 10.7, OSX 10.9, Win7, Win10), but on 6.9.x access is slow on all PCs. As a browser, I'm using Chrome in the latest version running on the OSes mentioned above.
Anyone found the same, anyone an idea?
Thanks,
-Alois
7 Replies
Replies have been turned off for this discussion
Which model is this with? The Duo is not a model that can run OS6.
Which services are you running?
Are you using any apps?
Sorry for the wrong model - it's a RN10200 wit 2 x 3 TB disks.
The folowing services are enabled: SMB, AFP, FTP, UPnP, HTTP, HTTPS and virus protection.
Additionally, in the "cloud section", ReadyNAS and Dropbox are up and running.
I'm not using any apps.
So far the behaviour has canged to the better in the meanwhile after some reboots of the NAS and re-mapping it as a network drive in Windows.
Response time is still a little slower on the OSX machines. Since I use SMB to access the NAS on all OSX machines I think the persisting problem tracks down to the SMB part. Additionally the missing "SMB" right to the NAS name in the OSX finder's shares view and the error message I get wehen I click it (instead of showing all available shares in right window pane) points into that direction. Below I have attached a screenshot.
When I downgrade to 6.7.5 everything ist fine, the name "NAS (SMB)" shows up in the finder's window and clicking the name displays all available shares on the NAS in the right window pane.
So, as a final conclusion, it seems to me like some changes in the SMB interface/protocol must have been made between 6.7.5 and 6.9.2
-Alois
Update: while things are accetable on WIN systems, OSX access via SMB is still slooooow and a lots of stalls. So I downgraded to 6.7.5 again and things work fine. I have attached a screenshot how the OSX finder displays the NAS and this is how it should be.
So far I can't see a solution except staying at 6.7.5 (and click away the update remeinder everytime I log into the admine pane :-(
Alois
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
