NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
[SOLVED] Ready NAS Duo unaccessible after a resync
Hello, A few days ago, I've received a warning about a resync that have to be done on the NAS I clicked on it, This warns me about the background task and the fact that the NAS will still be acces...
The ATA errors in this case may be due to using the disks on firmware that doesn't support WD disks that don't support TLER, especially if the ATA error count went up by six at a time and didn't increase recently.
The non-zero current pending sector count shows that the disk is bad.
Your huge Load Cycle Counts indicate that you never ran WDIDLE3 on these disks.
Power down, remove the bad disk and see if it boots
The non-zero current pending sector count shows that the disk is bad.
Your huge Load Cycle Counts indicate that you never ran WDIDLE3 on these disks.
Power down, remove the bad disk and see if it boots
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
