NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
[SOLVED] Ready NAS Duo unaccessible after a resync
Hello, A few days ago, I've received a warning about a resync that have to be done on the NAS I clicked on it, This warns me about the background task and the fact that the NAS will still be acces...
OK, it has boot this night then went stuck this morning.. the DISK 1 smart + indicator is increasing...
I will stop it now (before trying to boot it again.. will try to save data a find a new HDD..
on my other nas, Hitachi HDD seems to be stronger than WD...
I hope that the NAS can boot correctly when only the DISK 2 is in !
SMART Information for Disk 1
Model: WDC WD20EARS-00MVWB0
Serial: WD-WCAZA2025471
Firmware: 51.0AB51
SMART Attribute
Raw Read Error Rate 2979
Spin Up Time 1241
Start Stop Count 54
Reallocated Sector Count 0
Seek Error Rate 0
Power On Hours 33152
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 52
Power-Off Retract Count 51
Load Cycle Count 1728623
Temperature Celsius 39
Reallocated Event Count 0
Current Pending Sector 526
Offline Uncorrectable 25
UDMA CRC Error Count 0
Multi Zone Error Rate 3324
ATA Error Count 18
Extended Attribute
Hot-add events 0
Hot-remove events 0
Lp stat events 65615
Power glitches 0
Hard disk resets 0
Retries 0
Repaired sectors 0
I will stop it now (before trying to boot it again.. will try to save data a find a new HDD..
on my other nas, Hitachi HDD seems to be stronger than WD...
I hope that the NAS can boot correctly when only the DISK 2 is in !
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
