NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ultra 2 Plus won't boot - support case #18604734
I've been running a ReadyNAS Ultra 2 Plus for about four months now without any problems. A few days ago I upgraded it to the new 4.2.20 firmware, during which I think the system rebooted successfully...
Bonnie was running on the NAS (using Super-Poussin's add-on), so the test was not done over the network. At that point I did not want to enable SSH access, so I was sticking with the community tools.
The file size is > 2x the memory (2.1 GB file, with a standard PRO-6 with 1 GB ram total) . I tested 1, 2, 3, and 4 inserted disks, and the results went up about as I would expect. The NAS uses xraid2, so it is RAID-5 with 4 drives installed.
I agree that IOPS is the appropriate measure for random small block performance (though that point is perhaps more appropriate for the NFS tuning thread).
Are you exchanging your NAS for another ReadyNAS, or going with a different brand?
The file size is > 2x the memory (2.1 GB file, with a standard PRO-6 with 1 GB ram total) . I tested 1, 2, 3, and 4 inserted disks, and the results went up about as I would expect. The NAS uses xraid2, so it is RAID-5 with 4 drives installed.
I agree that IOPS is the appropriate measure for random small block performance (though that point is perhaps more appropriate for the NFS tuning thread).
Are you exchanging your NAS for another ReadyNAS, or going with a different brand?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
