NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ultra 6 Plus stuck on readynas Boot Logo
So i upgraded to OS6 4 days ago without any Problems..
did maybe 3-5 restarts afterwards.
Today the Nas wouldnt boot anymore.. Shows Readynas on LCD and is stuck;(
Raidar cannot find it
I cant enter the Boot Menu and have no NIC LED´s...1 only blinks when turning on the psu.
Fans run full
From browsing the forums this seems to be a known Problem, and i tried removing HDDS and reset the Ram.Also tried booting without ram.
Havent got a psu to try..want to try everything else before buying one.
right now trying usb recovery, though its unclear to me if i need the boot menu working for this?!
also the usb recovery tool can only load images per the html file, thats coming with the 4.2.31 firmware? And the file needs to be in the same folder as the recovery tool?
i tried 4.2 and os6 renamed so far.. no luck
before this i already ordered 2x2gb of new ram, so maybe this will help..
any way mods can help me with this problem? happy to provide pics of the data sticker..
also im very interested what caused this / if it will happen again / how to prevent it
Thx in advance for any help
20 Replies
Replies have been turned off for this discussion
What does it show if booted with no drives installed? If it's the same, then it does sound like a PSU issue. Do you have a spare ATX12V supply, or an old PC you can "borrow" one from? You can connect the ATX supply externally in place of the internal one.
If the new supply doesn't have enough 4-pin Molex connectors and you don't have any Y cables or SATA to Molex adapters, just connect what you can to the backplane and boot without drives. If it now comes up with a "No disks" status, but didn't before, then the supply is the issue.
hey sandshark and thx for the valued input!
so w/o disks it has the same behaviour
i thought about the old psu, but only can find one with 20p atx..
and i have lots of molex adapters, but i couldnt find one with 4p atx..only 6p atx extension:(
isit possible to use those in any way?
so i just took out my old corsair cx600..
i resplaced the 24p atx, the 4p atx, and the 3 moles in back
sadly same results-exept that case fan isnt moving...did i connect correctly?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
