NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Understanding Drive-swapping
So I've recently upgraded all of the drives in my ReadyNAS Business. I did it by shutting down my ReadyNAS and pulling ALL of the drives out. Then pushing 6 new drives into it and turning it back on....
If you upgraded firmware after you swapped out, then the NAS will upgrade the firmware when you boot up on the old disks. That is, it will check the firmware on the OS partition, and if it differs from what is in the flash it will upgrade (or downgrade).
But all the settings, etc are stored on the drives. So you can swap back (being careful to power down, swap disks, power up).
If you upgraded firmware after you swapped out, then the NAS will upgrade the firmware when you boot up on the old disks. That is, it will check the firmware on the OS partition, and if it differs from what is in the flash it will upgrade (or downgrade).
But all the settings, etc are stored on the drives. So you can swap back (being careful to power down, swap disks, power up).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
