Upgrade - Invalid checksum detected in the update file.

Thanks

viewtopic.php?f=65&t=58996

It didnt work with IE8 either.. Had to upgrade

Did you get it to download properly?

Do note that Skifta is an x86 add-on. It won't install on Sparc ReadyNAS (e.g. Duo v1). This is a separate issue to updating the firmware.

If you want to use Skifta you'll need to get an x86 ReadyNAS (e.g. Ultra, Pro). You'd need to transfer your data (e.g. across your network to the new NAS) as the RAID formats are different.

I get the same thing when I try to update my NV+. I'm in Chrome (on mac), but didn't think that would matter. Any thoughts?

As PapaBear asked, did you download the firmware update properly? Could you try downloading it using a different web browser?

What version of RAIDiator firmware are you currently running scrub?

Hey there,
I'm using the web admin interface for RAIDiator 4.1.7, System/Update/Remote/Check for updates. It notes there's an update and I then hit Perform system update. Churns for a bit and comes back with a checksum error. I assumed that the download happens directly to the NV+ box, but does it actually download it to the browser then upload to the NV+? I'll try with another browser...

Doesn't give any indication of working with Safari, don't get past checking for the update... I'll crank up a windows vm and try with ie...

Same results with chrome on windows 7. Trying with ie on win7 now...

Ok, ie9 on win7 gives me the same. Any other thoughts?

Thanks!

It downloads direct to the NAS box. Please check the settings are correct under Network particularly the DNS and Gateway settings.

You could also try a local update, downloading the firmware image from here: http://www.readynas.com/RAIDiator_4_1_8_Notes