NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Upgrading to 6.6.0
Have folks updated the legacy NAS units to 6.6.0? I have 6.5.1 at the moment and am wondering whether it's safe to go ahead with the upgrade.
Just done it on 2 ReadyNas Appliances Pro 6 and Ultra 6 both work fine after the upgrade.
I also tested ReadyDR which works fine too
Just done it on 2 ReadyNas Appliances Pro 6 and Ultra 6 both work fine after the upgrade.
I also tested ReadyDR which works fine too
We'd suggest following ReadyNAS OS 6: Firmware Upgrade Guide and Tips when doing any firmware update.
If you follow this guide you do minimise your risks.
If you use apps I would suggest checking the threads about app compatibility and updating your already installed compatible apps to the latest version (if you have not done so already) before doing the firmware update.
Hi All,
Upgraded just fine and updated the apps that I used. One issue I'm noticing is that I'll shut it down, and a short time afterward, it will start back up again. I don't run it 24/7 - it's more on demand, so this is a little odd. Any ideas on troubleshooting?
That might suggest a PSU that is on the way out. I assume this happens regardless of when or how the system is shutdown? If not the issue is likely something different.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
