URGENT software 4.1.12 gets corrupted over time

I was running 4.1.13[rc1] lately, and today I experienced the same problem as before, problems with accessing files, Raidar doesn't see the software version etc.

I tried to have a look at the logs, but the Readynas said "no logs exist". Saving the log files had the same result. Trying to shutdown using the GUI (frontview) didn't work, so I had to use the power button to shutdown and reboot.

After the reboot I was able to save logfiles, and after that I upgraded to 4.1.13.

In the saved system log file I found these entries:

• /var/log/auth.log: No space left on device


• /var/log/cron.log: No space left on device


• /var/log/kern.log: No space left on device

The auth.log and kern.log warnings appeared many times.

After I found these entries I cleared the log files, and that made the Frontview window appear much quicker.

I also found this in the system log file:

Oct 23 01:15:05 readynas-01NEON flash: probing 8-bit flash bus Oct 23 01:15:05 readynas-01 kernel: CFI: Found no NEON flash device at location zero Oct 23 01:15:05 readynas-01 kernel: NEON flash: unknown flash device, mfr id 0x1, dev id 0x0 Oct 23 01:15:05 readynas-01 kernel: NEON flash: Found no Atmel device at location zero Oct 23 01:15:05 readynas-01 kernel: This board is not supported. Oct 23 01:15:05 readynas-01 kernel: You can use parm_extport=X module parm. Oct 23 01:15:05 readynas-01 kernel: ID=6013 on i2c_addr=1f Oct 23 01:15:05 readynas-01 kernel: GPIO2X=7c Oct 23 01:15:05 readynas-01 kernel: lcd:driver loaded

Don't know what to think of this "error".