NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Use 2 HDD as single drives in READYNAS 312
Hi, i'm using a ReadyNas 312 to backup data from a ReadyNas 424. The 312 holds two HDD: one with 8 TB and another with 6 TB. I did configure the system as Flexraid (JBOD) and for each HDD a sing...
coppi wrote:
Thank you for the answers.
I bought the ReadyNas 424 and it's running with XRaid (Raid 5) and currently there are 3 HDD in it (10.89 TB).
Before i was using the ReadyNas 312 and did backup the data to a USB-Drive.
But with the 424 size is getting bigger and he USB-Drive will not have enough space soon.
So i needed a different solution.
I know about the risk that there is no redundancy with two disks configured as JBOD.
I just want to make sure that if one disk is failing the other one is still working and i only have restart the backup for the new disk.
Btw: Backup is also made to another NAS placed at a different location
It sounds like the RN312 is being used to back up the RN424. I've done what you are doing myself (running two jbod volumes on a 2 bay backup NAS), in order to have enough volume space for everything. It's a workable approach, though expansion (or replacing failed disks) can take some time. And you might have to occasionally move shares around on the two volumes to maintain reasonable free space on both volumes.
What you are expected to do is delete the volume on the failed disk. Then replace it, create a new volume, and restore the data on it.
If you do end up with an inactive volume, you delete it before you insert the replacement disk.
If the volume you removed was the primary one, the system migrated that to the other. When you put the previous primary back in, the system may have been confused. When both were again in the system, it did a re-sync of the OS and swap partitions.
StephenB has described what to do if a volume really dies. if you are asking if that's the way it will work if you remove and replace drives that have not failed, the answer is yes, and you should not be doing that.
Sandshark wrote:
StephenB has described what to do if a volume really dies.
Or if you need to expand it. You always need to delete the existing volume, put in the new disk, and create a new one.
It'd be different if you had a 4 bay NAS and were using two RAID-1 volumes. But with jbod volumes, there is no redundancy, so you need to manually delete/recreate the volumes.
Thank you for the answers.
I bought the ReadyNas 424 and it's running with XRaid (Raid 5) and currently there are 3 HDD in it (10.89 TB).
Before i was using the ReadyNas 312 and did backup the data to a USB-Drive.
But with the 424 size is getting bigger and he USB-Drive will not have enough space soon.
So i needed a different solution.
I know about the risk that there is no redundancy with two disks configured as JBOD.
I just want to make sure that if one disk is failing the other one is still working and i only have restart the backup for the new disk.
Btw: Backup is also made to another NAS placed at a different location
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
