NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Tinyhorns
Aug 21, 2016Apprentice
Very slow Reshape
Hi,
I have an external cabinet with 3 disks (EDA500), added a 4th, and now the reshape has begun.
but its slow as hell.
15618353664 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
[========>............] reshape = 42.5% (3319995624/7809176832) finish=5487.7min speed=13633K/sec
Running the latest version 6.5.1, is this speed expected when it is a esata-thingy?
// T
mdgm wrote:
Those are high capacity disks. I think the resync time is reasonable for the EDA500.
At 13 MB/sec, it will take about a week to resync. Since performance stalls during the resync, and if anything goes wrong during the week there is risk of data loss.
Even if that's the best the system can do, from a user perspective it isn't great.
Granted the port multiplier will constrain performance, but 13 MB/sec does seem very slow when you are taking about disks that are at least 10x faster than that.
7 Replies
Replies have been turned off for this discussion
- mdgm-ntgrNETGEAR Employee Retired
What capacity disks are these?
The EDA500 uses a port multiplier so the performance is lower than for disks in the main chassis.
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!