NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WD Red 8TB WD80EFZX - anyone install them yet?
Has anyone installed WD Red 8TB WD80EFZX drives yet? If so, any issues? I read a few reviews that said they ran hot, made more noise than other drives and had non-standard mounting holes. I have t...
StephenB wrote:I've installed three in my RN524x (one was previously in an RN102, the other was in an RN202).
They do have alternative mounting holes on the bottom, but they also have the center hole on the side, so I was able to keep the plastic inserts.
I've had no issues with either temps or noise. They've been running the disk test for about 10 hours, and they have heated up to ~45C with the fan set to quiet. But normally they are pretty close in temperature to the WD60EFRX (perhaps 1-2C warmer).
Good to hear so I placed my order for two WD80EFZX and should have them in the next few days. I'll be replacing Disk 1 & Disk 2 with the 8TB drives and moving the 4TB drives to my Ultra4+ to replace two 2TB drives. I'll keep an eye on the temp/noise but expect them to be inline with previous RED drives from WD. Although, my current 4TB drives are a bit lower at 31-34C with the fan set to Cool.
NASguru wrote:
Good to hear so I placed my order for two WD80EFZX and should have them in the next few days.
After the disk test completed, my temps dropped to 32C. My WD60EFRX are in an adjacent RN526 and are running between 31-33C. I think you'll end up in the 34-37 range (slightly higher than your WD40EFRX).
One thing I have noticed - OS 6 doesn't always report the smart stats for these drives. Sometimes the temps are missing, and when I click on the "green ball" icon I see -1 for reallocated sectors, etc. smartctl does show them when I use ssh, so this is a bit puzzling. I reported it a while ago, but haven't seen any response from Netgear (or any fix).
Which firmware are you running StephenB?
StephenB wrote:
NASguru wrote:Good to hear so I placed my order for two WD80EFZX and should have them in the next few days.
After the disk test completed, my temps dropped to 32C. My WD60EFRX are in an adjacent RN526 and are running between 31-33C. I think you'll end up in the 34-37 range (slightly higher than your WD40EFRX).
One thing I have noticed - OS 6 doesn't always report the smart stats for these drives. Sometimes the temps are missing, and when I click on the "green ball" icon I see -1 for reallocated sectors, etc. smartctl does show them when I use ssh, so this is a bit puzzling. I reported it a while ago, but haven't seen any response from Netgear (or any fix).
Oh yeah, now you tell me that. :smileylol: No worries, hopefully it gets worked out over time but if not I guess we could retrieve them via SSH.
On a side note, I noticed you can see the smart stats in the logs too.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
