NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
MS510txm, firmware V1.1.0.7 - anyone with issues?
Has anyone that updated their switch(es) to this new firmware found issues with it?
For e.g. any of the following:
1. Upon updating, the switch decided to connect to Netgear Insight - and be on? (I had mine deactivated).
2. Upon deactivating Netgear Insight, the switches loses the configuration, and resets to default configuration.
3. Uploading a configuration text file to the switch, will configure the switch for 5 mins before it decides to reset itself back to default.
4. I reset the switch back to defaults, and reconfigured the lot back to my needs, then a few days later, the configuration is dropped and resets to default.
I have 2 switches, with slightly different configurations. 1 switch seems to be stable (I only encountered the 1st problem with it), the other, is problematic with the remaining issues.
I have two MS510TXMs and two MS510TXUPs. I only encountered the first problem on all of them, and I was able to disable Insight on all of them without losing any data. For the one switch that you are having multiple problems with, you might need to open up a case with Netgear.
3 Replies
I have two MS510TXMs and two MS510TXUPs. I only encountered the first problem on all of them, and I was able to disable Insight on all of them without losing any data. For the one switch that you are having multiple problems with, you might need to open up a case with Netgear.
Thanks for the note - confirming the first. I'll open a case with Netgear regarding the problematic switch then. Cheers,
I had an issue where all my Private VLAN Associations were deleted. It on had the Primary VLAN and the Community VLAN were no longer associated.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
