NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WOL with NIC Teaming
I have 3 x86 NASs (running 4.2.17) each with LACP NIC Bonding and WOL enabled. All three NASs are connected to a HP Procurve V1810g-24 switch also with LACP configured for the required ports. Here...
I have WoL enabled now (missed that one, sorry).
With the Pro shut down the trunk now shows as "Link Status = Down" but the ports show 100MbpsFullDuplex (green) just as you mentioned.
I tried sending magic packets via both UDP and TCP/IP to the ReadyNAS IP (host) with no response.
Were you successful with UDP or TCP/IP prior to ReadyNAS NIC bonding?
Which port did you designate with the one you were successful with?
With the Pro shut down the trunk now shows as "Link Status = Down" but the ports show 100MbpsFullDuplex (green) just as you mentioned.
I tried sending magic packets via both UDP and TCP/IP to the ReadyNAS IP (host) with no response.
Were you successful with UDP or TCP/IP prior to ReadyNAS NIC bonding?
Which port did you designate with the one you were successful with?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
