NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Write STALLS on first try
I'm running Windows 7 64-bit SP1 with a ReadyNAS Pro 6x1TB (Seagate Enterprise drives with RAIDiator-x86 4.2.19). These are coupled directly via a Netgear GS105 switch. I've been having the follow...
I used to have this problem. It's due to something in your network setup, usually wrt the IP address/NAS or PC name not being instantly recognised.
I solved the problem by reinstalling all the network drivers and making sure they were the latest. Adjusting the settings on the switch also helped, but your switch is unmanaged I think. Try turning Jumbo Frames off and/or enabling Flow Control.
Are your IP addresses DHCP derived ? If not, try that.
Also see if a direct connection has the same problem - I bet it doesn't.
See : http://sphardy.com/web/readynas/how-to- ... -readynas/
I solved the problem by reinstalling all the network drivers and making sure they were the latest. Adjusting the settings on the switch also helped, but your switch is unmanaged I think. Try turning Jumbo Frames off and/or enabling Flow Control.
Are your IP addresses DHCP derived ? If not, try that.
Also see if a direct connection has the same problem - I bet it doesn't.
See : http://sphardy.com/web/readynas/how-to- ... -readynas/
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
