NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Your Netgear storage is not accessible form this computer. check your network setting
Hi
I installed new huawei HG630a router. After installing it I am not accessing my NAS Box 102 . When i connected through with RAIDar and its shwoing following error message:
"Your Netgear storage is not accessible form this computer. check your network setting".
Currently i set the nax box static ip 192.168.0.7.
Windows 10, Nas box version 6.6.2, Model Number N102
How can i access my nas box.
Hi ashishkot,
You can try doing an OS re-install to reset the network settings.
If you have an RN102, you can try the step found on the link below:
How do I access the boot menu on my ReadyNAS 102, 202, 212 or 312?
Regards,
9 Replies
Replies have been turned off for this discussion
what is the IP address range for DHCP that your router is using?
hi
Its showing 192.168.1.1
ashishkot wrote:
hi
Its showing 192.168.1.1
That's the problem. Your router is distributing 192.168.1.x addresses, and you assigned a 192.168.0.x static address to the router.
Normally it's better to set the ReadyNAS up to use DHCP, and reserve the IP address in the router.
Anyway, you have three ways to resolve this:
- change the router to use 192.168.0.x addresses
- do an OS reinstall in the router, which will reset the network configuration to use DHCP and also reset the NAS admin password to password See pages 19-20 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
- directly connect the NAS to a PC, and assign the PC a static address in the 192.168.0.x range. Then you can access the NAS and reconfigure the network settings. https://kb.netgear.com/21414/How-do-I-direct-connect-between-ReadyNAS-and-PC-Mac?cid=wmt_netgear_organic
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
