NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAX214v2 power LED blinks in series of 3 blinks
I have a WAX 214v2 access point that is not connecting to the wired switch. I can access the unit through WiFi but no internet access. The unit is PoE and powers on properly. However, after bootin...
Hi,
When powered on normally, the behavior of the power light should be to first display a amber/red light that stays on, and after a period of time, it will change to a green light that stays on.
So, what color is it when AP flashes three times in a row, how long does it last each time, how long does it stay on, and has the color changed during this process?
I see that his picture shows a yellow light on. Can you provide more detailed information
Below are some more details of LED status.
|
|
Led status |
|
Booting |
Power： Solid amber LAN：depend on LAN status 2.4G：led Off 5G ： led Off |
|
Board ready |
AT/adapter：solid green AF：solid amber |
|
2.4G radio on：solid green 2.4G client link：solid blue 2.4G client link: blinking blue, if there is an active traffic in 2.4GHz radio. 5G radio on：solid green 5G client link：solid blue 5G client link: blinking blue, if there is an active traffic in 5GHZ radio |
|
|
Firmware upgrade |
Power：blinking amber Other led keep the last status |
|
Hard factory reset |
Less than 10s: solid amber More than 10s: blinking amber |
|
Soft factory reset |
No special led behavior |
one more point, WAX214v2 doesn't support insight cloud as it's a standalone AP.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
