Mr6500 where do I find admin password

[JT240Z · Accepted solution]

There's a small hole under the cover in a slot on the connector side of the device.  It will say reset near it.  Use a wire probe (straightened paper clip).

Push the reset button in the hole for 10 seconds with the battery attached and charged.  That should initiate a factory reset.

[JT240Z]

Assuming that it's still the factory default, then it should be on the label under the battery.  If it doesn't work, then you need to do a factory reset and try again.

[Gramp]

I tried the one underneath the battery. I’ll give the factory reset. Thanks for the feedback.

[Gramp]

I’m currently locked out on the iPad accessing m6. Because of the password issue. Do you know how to do the factory reset from the device it self?

[JT240Z · Accepted solution]

There's a small hole under the cover in a slot on the connector side of the device.  It will say reset near it.  Use a wire probe (straightened paper clip).

Push the reset button in the hole for 10 seconds with the battery attached and charged.  That should initiate a factory reset.

[Gramp]

Combined messages fixed the problem thanks for the help.