M4300 and Vlans not working

[andrewl_]

Hi all,

We just bought a M4300 switch and i are having som issues with VLANS , for some reason i cant get it to work. 

Step one. I disabled the routing.

Step two.

I followed this guide . > https://kb.netgear.com/31026/How-to-configure-a-VLAN-on-a-NETGEAR-managed-switch

Tagged port 22-24 with VLAN 220, disabled all other VLAN´s on thoose ports. 

2 ports  from the firewall in HA mode. So only one of them two ports will be active at the same time .

1 ports to our main switch (  HP/ARUBA ) for 1  vlan.  Its pretty basic. but for some unknown reason it dont route traffic.

If i go straight from Firewall to Aruba Switch everything works like it should.  So i assume i am missing something basic. 

I did not do the PVID , since thoose 3ports are in use for Firewalls and other switch. 

Any help would really be appreciated .( i come from a HP/Aruba world ) 

Andrew

[andrewl_ · Accepted solution]

After 3 vlans reset and then 1 hard reset , same config worked...

Andrew

[andrewl_ · Accepted solution]

After 3 vlans reset and then 1 hard reset , same config worked...

Andrew