NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Port Mirroring Assistance
Product Name GS105Ev2
Switch Name
MAC Address 3C:37:86:2B:93:AB
Bootloader Version V1.4.0.5-VB
Firmware Version V1.6.0.11
DHCP Mode Enable Refresh
IP Address 10.99.1.172
Subnet Mask 255.255.255.0
Gateway Address 10.99.1.2
Configuration:
Verizon ONT <-------> GS105Ev2 Port 1 Port 2 <--------> Firewall WAN
Traffic is passed from port 1 to port 2 Internet access is OK
Monitor set Port 1 to Port 5
Port 5 connected to Wireshark Workstation
Cannot see the traffic from Port 1
1 Reply
Welcome to the community!
Just to confirm the configuration done on the switch, on the System > Monitoring > Mirroring, the following are:
- Destination port is 5
- Source port is 1
- Mirroring set to enabled
If such are the following, have you also tried performing a reboot and/or a factory defaults?
Another thing that you can try is to change the Ethernet cables and try a different workstation if possible.
Please let us know how it goes.
Regards,JeraldM
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
