NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
dhsoule
Mar 28, 2017Tutor
Anyone with experience with R7300 connecting to Arris NVG448BQ via IP Passthrough Mode?
Does anyone have experience with installing either a R7000 AC 1900 router or the R7300 AC 1900 router with DST in connecting to an Arris NVG448BQ ADSL2+ from Frontier Communications? There is no true bridge mode for this device which would make life easier. Rather, there is an IP Passthrough mode which has no real published documentation. Any input is appreciated.
Mission accomplished! :smileylol: With some minor speedbumps I was able to get the gateway into IP passthrough mode. From there Netgear Genie made it very easy. Impressive. So far love the router. The DST adapter is being stubborn, but I live in a 40 year old home with old school electical. Need to work through that but otherwise up and running.
Thanks to all for your assistance.
9 Replies
- William10aMaster
Modem manual link https://www.dslreports.com/forum/r31139536-New-Gateways-FiOS-Vantage-Arris-NVG448BQ-NVG468MQ-NVG448B-NVG443B
It would easier to disable the modem/router 2.4 and 5 ghz radios and let the netgear be a access point and use it for the wifi connections instead of the arris modem/router a simple lan cable from one of the modem's lan port and connect it to the internet port of the netgear and you should be done. The modem you have is design for your isp the manual I found is from the FCC web site since have file specs on the networking equipement with them before they can use it the fcc id number is GZ5NVG4XXQ. Use 5NVG4xxQ for the fcc id number
I hope this helps.
- dhsouleTutor
Thank for the info, certainly something to consider. I cannot access the link for the manual as I don't have your credentials. Any way that you can post it for me to an ftp site or something along those lines?
- William10aMaster
This link may work better for it is a link to arris http://www.arris.com/products/nvg44x-xdsl-voice-gateway/
Here is the data sheet fr the modem link http://www.arris.com/globalassets/resources/data-sheets/nvg44x_datasheet.pdf
Click on link fcc link 5NVG4XXQ the links must broken some how and select nvg448bq users manual
I'm assuming that IP Passthrough on the NVG448 is similar to the NVG599. If true, then it's a useful function. It's a pseudo-bridge mode in that it bypasses NAT for a single device, which would you assign to be the R7300. Your R7300 will end up sharing the public IP address with the NVG448. The NVG448 continues to function as a router for all other connected devices. You can even use the NVG448's Wi-Fi as a dedicated guest network.
- dhsouleTutor
Thanks for the input, this is the approach I am trying to take. My plan is to completely disable the wireless and routing features in favor of the R7300/R7000. The challenge is in the documentation. While the NVG598/599 is well documented, the NVG448BQ is not. I was finally able to connect with Arris tech support who provided the "official" procedures for IP Passthrough, unfortunately, the GUI interface and parameter switches are differenet enough to make this painful. Frontier tech support is less than helpful and claim to not have the documenation as this gateway is new. Just enought to make this uncomfortable.