My R7000 bricked during update to V1.0.9.18_1.2.27

[BlueWonder]

During upgrading my router something went wrong.

Now I can not connect to my router.

Even trying to reset or reflash with tftp will not work.

What to do?????

[BlueWonder · Accepted solution]

A friend had the solution.

I used TFTP2.EXE on my laptop (Windows 10).

He told me to uninstall TFTP2.EXE and activate  TFTP on my windows 10 laptop.

After that i run CMD and type TFTP -i 192.168.1.1 PUT R7000-V1.0.9.18_1.2.27.chk

This is for me the solution. My R7000 is working again.

[William10a]

If your willing to open the router up you reflash the router with the use of a serial cable there are many videos on the web that show how to this may be your only chance to sve the router if you can not access routervia a lan port. I would clear the nvram before you refash the router there still may old data in it causing poroblems.

[BlueWonder · Accepted solution]

A friend had the solution.

I used TFTP2.EXE on my laptop (Windows 10).

He told me to uninstall TFTP2.EXE and activate  TFTP on my windows 10 laptop.

After that i run CMD and type TFTP -i 192.168.1.1 PUT R7000-V1.0.9.18_1.2.27.chk

This is for me the solution. My R7000 is working again.