Reply

R7000 latest Firmware update

vb85
Aspirant

R7000 latest Firmware update

   Hi all,just joined and am new to the forums.

    Have had my router a few years and have always updated the firmware after I recieived email from Netgear by going into the router settings on my desktop browser and clicking on check for firmware update then it would do it automatically.

   My current firmware is listed as 

V1.0.9.88_10.2.88

   I recently received an update email around Christmas and when I went checked for firmware update it said my firmware is up to date.

   When I went to the netgear website it said the latest firmware version for my model was V1.0.11.110,and it had a link to download it and install manually. The odd part was I looked at an update email from August and it listed the version as V1.0.11.106 and I'm pretty sure I did the update at that time but I didn't really pay attention to the version number after the update.

  Also the email I received at Chrismas didn't have a firmware version listed,it did have a link for "Learn how to update here" and when I clicked on it I ended up on a page on how to update with the Nighthawk app which I don't have.

   Sorry for the lengthy post but I'm not really sure what to do here,should I manually update to V1.0.11.110,or just leave things as they are now ? Also I would think that my firmware version should be showing as V1.0.11.106 which was the version listed in the email at the time of my last update,instead of showing the V1.0.9.88_10.2.88 as the current installed version.

 Very confused here,thanks in advance for any help.

 

vb85

Model: R7000|AC1900 Smart WIFI Router
Message 1 of 18
plemans
Guru

Re: R7000 latest Firmware update

For some reason the auto-update is stuck on the .88 version. 

You can manually update if you choose. If you do, I'd do it over a hardwired connection and not using the app or over wifi. Those are where we see the most issues with corrupt firmware. 

https://kb.netgear.com/23960/How-do-I-manually-update-the-firmware-on-my-NETGEAR-router

 

With the R7000, firmware has been an issue for a while. Many times I tell people "if its working, leave it alone", because its had so many issues with firmware changes. 

CM2000-> RAXE500-> GS716v2-> WAX218-> EX8000
Message 2 of 18
vb85
Aspirant

Re: R7000 latest Firmware update

   Thanks for the info piemans. My router is plugged into my modem and my desktop is connected to router by ethernet cable so I'm guessing that should qualify as doing it by hardwired connection. I'll try it later tonight after family members are done for the night in case anything goes wrong !!

 

  vb85

Message 3 of 18
vostro
Aspirant

Re: R7000 latest Firmware update

V1.0.11.116 was released days ago, anybody tried? 110 was problematc. so far only 42 is stable.

Message 4 of 18
vb85
Aspirant

Re: R7000 latest Firmware update

  I'm seeing V1.0.11.116 on there now too,wasn't up there last time I looked. Anyone know how long ago V1.0.9.88 was released ?

    Although it's mentioned that it's a stable version with all the hacks etc you keep hearing about I'd rather have something more recent if it's older.

 

  vb85

Message 5 of 18

Re: R7000 latest Firmware update


@vb85 wrote:

  Anyone know how long ago V1.0.9.88 was released ?

 

 


Did you read the release notes? They usually have a date on the bottom.

 

Visit the support pages:

Support | NETGEAR

Feed in your model number and check the documentation for your hardware.

Just another user.

My network DM200 -> R7800 -> GS316 -> PL1000 -> Orbi RBR40 -> Orbi RBS50Y -> RBS40V
Message 6 of 18
DoctorX
Guide

Re: R7000 latest Firmware update

I installed v1.0.11.116 two days ago.  It seems to be as stable as the last few releases for me.  Your results may vary.  The good news is the Disney Circle popup no longer happens on each login to the router.  Unfortunately, now there's a banner pushing the Netgear App that appears across the top of the page.

Please do not listen to those recommending old, more stable version of the firmware.  The older firmware might be more stable, but your security is jeopardized if you don't install the latest release with the latest security patches.

 

 

Message 7 of 18
Portwey84
Luminary

Re: R7000 latest Firmware update

@michaelkenward @DoctorX @vostro 

 

Well I've not looked at the forum for a week or so, but as this thread has revealed, v.116 has been released and so I'll be updating after this post.

 

Interesting to see that when logged into the browser GUI, the check update firmware still doesn't work. It states it's connecting to the Netgear server and then comes back with no new firmware available. Same on the Nighthawk App. It's ridiculous that Netgear can't even sort this out.

 

As with the previously released firmware versions, I've had no problems with the day to day operation of the router and so I hope it continues with this latest release. I also concur about not downgrading to 3 year old firmware versions. That to me just doesn't make any sense from a security perspective. Clearly, if the latest firmware versions aren't working for some router owners, then that indicates either a problem with the router, environmental problems, problems with ISP's or corrupted/failed firmware uploads.

 

 

Model: R7000|AC1900 Smart WIFI Router
Message 8 of 18
vb85
Aspirant

Re: R7000 latest Firmware update

  As far as the release date of   V1.0.9.88_10.2.88 I'm not sure but the release notes say updated 12/13/20,but I'm thinking it must be older than that because the last time I updated was in November or so. I'll keep an eye on the forums for the next couple weeks and if there aren't a  lot of problems posted with .116 I'll update to that.  Not having any problems with 9.88 but if it's older I'd rather update to something newer for security reasons. If I do so with no problems then I'll mark this as solved.

   A big Thank You to everyone who replied for your help and insight.

  vb85

Message 9 of 18
Portwey84
Luminary

Re: R7000 latest Firmware update


@vb85 wrote:

  As far as the release date of   V1.0.9.88_10.2.88 I'm not sure but the release notes say updated 12/13/20,but I'm thinking it must be older than that because the last time I updated was in November or so. I'll keep an eye on the forums for the next couple weeks and if there aren't a  lot of problems posted with .116 I'll update to that.  Not having any problems with 9.88 but if it's older I'd rather update to something newer for security reasons. If I do so with no problems then I'll mark this as solved.

   A big Thank You to everyone who replied for your help and insight.

  vb85


All the release notes for all of the older firmwares were updated around that date for some reason, probably something to do with the guidance notes on updating firmwares. V.42 which appears to be the 'stable' favourite for all those that can't seem to get any other firmware to work properly, is now over 3 years old and I can tell you now, I wouldn't personally put that on my router!

 

That aside, I have since run Bitdefender Home Scan and yet again, the only equipment that shows up as being a security risk, is, yup you guessed it, the router itself.

Model: R7000|AC1900 Smart WIFI Router
Message 10 of 18
DoctorX
Guide

Re: R7000 latest Firmware update

I was able to set Timezone to "GMT-5:00 Eastern Time" and I was able to specify my own NTP server.  No issues with this.
Perhaps the problem only occurs with "GMT" ?

Message 11 of 18
Portwey84
Luminary

Re: R7000 latest Firmware update


@DoctorX wrote:

I was able to set Timezone to "GMT-5:00 Eastern Time" and I was able to specify my own NTP server.  No issues with this.
Perhaps the problem only occurs with "GMT" ?


As I'm in the UK, I really do need my router to be set at GMT and to be able to set daylight saving time. With this latest release, it's not letting me do that. I prefer to select my own NTP server too and I can't even do that. I didn't have an issue prior to upgrading. That aside, I won't be downgrading to the previous version.

Model: R7000|AC1900 Smart WIFI Router
Message 12 of 18
DoctorX
Guide

Re: R7000 latest Firmware update

It may be quicker for you to move to a different time zone than to wait for a fix for this. Smiley Happy

Message 13 of 18
antinode
Guru

Re: R7000 latest Firmware update

> [...] Anyone know how long ago V1.0.9.88 was released ?

 

   The modification date+time on the files in the kit can be determined:

 

$ unzip -l R7000-V1.0.9.88_10.2.88.zip
Archive:  R7000-V1.0.9.88_10.2.88.zip
  Length      Date    Time    Name
---------  ---------- -----   ----
 31649850  06-24-2019 14:07   R7000-V1.0.9.88_10.2.88.chk
     1806  07-04-2019 12:09   R7000-V1.0.9.88_10.2.88_Release_Notes.html
---------                     -------
 31651656                     2 files

 


> Did you read the release notes? They usually have a date on the
> bottom.

 

   A "Last Updated" date on a web page is hardly a reliable guide.
"12/13/2020" seems to be a bit later than "06-24-2019" (or
"07-04-2019").

 


> As far as the release date of V1.0.9.88_10.2.88 I'm not sure but the
> release notes say updated 12/13/20,but I'm thinking it must be older
> than that [...]

 

   Beware of free advice from reality-resistant sources, I always say.

Message 14 of 18
Portwey84
Luminary

Re: R7000 latest Firmware update


@DoctorX wrote:

It may be quicker for you to move to a different time zone than to wait for a fix for this. Smiley Happy


Ye Gods!!!! absolutely bloody not! Don't you know that the whole world revolves around GMT? Smiley LOL

 

Anyway UPDATE.........

 

I fixed the issue. It would appear that when I attempted to change the NTP, I was connected to my VPN and it seems that this might have caused the issue. I clearly don't know how, but after I disconnected my VPN, I went back into the R7000 browser GUI and I have now successfully set the NTP to GMT and my own preferred server.

Message 15 of 18
JWS9518
Apprentice

Re: R7000 latest Firmware update

Knock on wood..but this is the first stable firmware for me since .42.  I have one of the older R7000's and could not get any stability with firmware past .42.  So far, this latest one has worked fine for me.  

Message 16 of 18
vostro
Aspirant

Re: R7000 latest Firmware update

updated to 116 and got 36 hours stable connections, then same thing like past version beyond 42 happened: many devices get disconnected.

Message 17 of 18
JWS9518
Apprentice

Re: R7000 latest Firmware update

So far, 5 days later that hasn't happened to me.  Like you, I had nothing but problems with the previous firmwares.  I can't explain why this one suddenly fixed the issues for me, but it did, at least for the moment.  Don't worry though, Netgear will probably break it on the next update. :-p

 

 

Message 18 of 18
Top Contributors
Discussion stats
  • 17 replies
  • 971 views
  • 1 kudo
  • 8 in conversation
Announcements