Orbi WiFi 7 RBE973
Reply

Re: I can no longer log into my SXR80 Router

Mstrbig
Master

I can no longer log into SXK80 system using 192.168.1.1

I have always been able to login to 192.168.1.1, or any of the orbilogin methods. 

Recently I am no longer able to access any of the Router or 2 satellites by going to 192.168.1.1, 192.168.1.2, or 192.168.1.3.

However I can access and login to the following:

192.168.1.1/hidden_info.htm or 192.168.1.2/hidden_info.htm 

192.168.1.3/hidden_info.htm or 192.168.1.1/debug.htm 

192.168.1.2/debug.htm or 192.168.1.3/debug.htm

I've looked everywhere and cannot find a fix. Any help will be appreciated.

Message 1 of 25
schumaku
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1


@Mstrbig wrote:

I have always been able to login to 192.168.1.1, or any of the orbilogin methods. 

Recently I am no longer able to access any of the Router or 2 satellites by going to 192.168.1.1, 192.168.1.2, or 192.168.1.3.

However I can access and login to the following: ...


Please be a little bit more verbose. What happens, why do you think you can't login? Any messages, any screenshots, ....?

Message 2 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

Hmmm… can't reach this page

It looks like the webpage at https://192.168.1.1/ might be having issues, or it may have moved permanently to a new web address.

 

Message 3 of 25
schumaku
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1


@Mstrbig wrote:

Hmmm… can't reach this page

It looks like the webpage at https://192.168.1.1/ might be having issues, or it may have moved permanently to a new web address.

 


Interesting. Has the latest hack somebody tried on the consumer routers with some wannabee-sso-like-code in qa-quality made it over to the Orbi Pro? What I have in mind is this wonderful *****. Does this look familiar what might go on under the hood there?

 

 

 

 

Message 4 of 25
schumaku
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1

Wait - do you have https enabled on your Orbi Pro SXK80 system?

 

Or have probably the Facebook Wi-Fi portal for the guest WiFi network enabled and active? Wireless > Guest Portal (Orbi Pro WiFi 6 AX6000 Tri-band WiFi System (SXK80) User Manual, p.109 ff.)

 

The special 192.168.1.1 URLs you listed before are plain http only of course?

Message 5 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

No, but I'll try to access and double check.

Message 6 of 25
schumaku
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1

Ref. the Facebook WiFi guest portal https://kb.netgear.com/000055556/How-do-I-set-up-and-enable-Facebook-Wi-Fi-on-my-wireless-access-poi... ... Meta is winding down this service, or has finally done it now. So this feature became obsolete from what I understand. @plemans do you have some insights for a non-Orbi Pro owner like me? Have these controls be removed, or does everthing remain in place (without practical usage), and levaing any kind of side effects open?

Message 7 of 25
plemans
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1

@schumaku I never used the facebook options as I avoid social media like the plague 🙂 

 

@Mstrbig I know it sounds stupid, but did you end up on a different IP address? did you check the gateway to confirm its at 192.168.1.1? 

 

Message 8 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

No, same IP address, pinging and tracert fine. Also the router and satellites are up and running perfect. Just cannot log in because of a certificate anomaly. And I can't find a work around.

The really weird thing is I can access no problem to 192.168.1.1/debug.htm 

Message 9 of 25
quagmire1
Luminary

Re: I can no longer log into SXK80 system using 192.168.1.1

Is this the actual error message?

 

ERR_SSL_KEY_USAGE_INCOMPATIBLE

 

If so, this is a known issue.  There are several threads here discussing it.  Workaround is to use Firefox. We're waiting for Netgear to fix this - it's ultimately on them.

Message 10 of 25
DavidGo
NETGEAR Expert

Re: I can no longer log into SXK80 system using 192.168.1.1

Hi all,

 

The issue is confirmed and we now have a patch firmware to fix it. After installing the patch firmware a factory reset is required.

If anyone would like to install the patch firmware please send me a PM.

 

Thanks

DavidGo

Message 11 of 25
plemans
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1

Thanks @DavidGo !

Message 12 of 25
schumaku
Guru

Re: I can no longer log into SXK80 system using 192.168.1.1

Hello @DavidGo 

 

Lost as before.... what was relly fixed now?

 

We're supposed being able to login to the Web UI as before?

 

A new self.signed certificate deployed so the ERR_SSL_KEY_USAGE_INCOMPATIBLE error does no longer appear?

 

Can a factory reset, thus new installed SXKn0 be added again to Insight, so the settings are back?

 

Thank you

-Kurt

  •  
Message 13 of 25
DavidGo
NETGEAR Expert

Re: I can no longer log into SXK80 system using 192.168.1.1

Hi @schumaku 

 

In the patch firmware it is just fixing the issue where the SXK80 is not allowing login to the local admin page, but everything else is working as normal. 

 

After installing the patch firmware and doing the factory reset the ERR_SSL_KEY_USAGE_INCOMPATIBLE error no longer appears. 

 

If the device is added in Insight,  it should come back online in Insight and sync the config once Internet access is restored to the SXR80.

 

Thanks

DavidGo

Message 14 of 25
MJDS
Aspirant

Re: I can no longer log into SXK80 system using 192.168.1.1

Hello DavidGo,

I have the same problem with my router.

Is there a new firmware update for my router.

At this moment there isn't one.

Message 15 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

The patch did not work for me in the latest version of Edge in Windows 11. 

I was able to access my CP with Firefox and install the patch. I confirmed the router and both satellites installed the patch. Unfortunately, there was No change in Edge after factory reset. 

Message 16 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

Private message @DavidGo and ask for the patch update. 

 

Message 17 of 25
Techdeskxy
Aspirant

Re: I can no longer log into SXK80 system using 192.168.1.1

Did you push the firmware update through the app or the web portal?

Message 18 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

Web Portal

But! I have an update. After attempting and failing following the instructions, I went back to Firefox, accessed my Orbi router and backed up and erased the routers settings bringing it back to factory settings. Then I restored it from my backup. I did not reboot or anything. I went to the latest update of Edge and now I can access the router at he normal ip 192.168.1.1 with no error. I don't know why the factory reset did not work, but for me the above method completed the fix.

Message 19 of 25
Mewohkie
Tutor

Re: I can no longer log into SXK80 system using 192.168.1.1

Is this the sxr80-v4.3.2.1001356-signed firmware? I was sent a copy that I installed but I am still seeing the SSL Certificate error when trying to log into the router on edge or chrome.

Message 20 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

I still see the certificate error message as well, but I am able to hit continue and log in, where before I would get a missing page.

Message 21 of 25
ReneD
NETGEAR Moderator

Re: I can no longer log into SXK80 system using 192.168.1.1

Hello @Mstrbig,

 

And welcome to the NETGEAR Community! 🙂

 

There is an ongoing issue for Orbi routers pertaining to certificate error and affected browsers are both Edge and Google Chrome. Netgear Engineering team plans to release a firmware that fixes this issue soon but there is no ETA. For now you can use a patch firmware that fixes this issue. YOu may want to try to visit the link below to get the patch firmware and load it to your router. The step by step procedure are already mentioned in there as well.

 

https://community.netgear.com/t5/Orbi-Pro-WiFi-for-Small-Business/Chrome-Certificate/m-p/2367330#M68...

 

Have a lovely day,

 

Rene D 
Netgear Team

Message 22 of 25
Mstrbig
Master

Re: I can no longer log into SXK80 system using 192.168.1.1

Thanks, @DavidGo already sent me the patch a while ago. I'm now able to login with no issues. 

So, if anyone else has this issue, use the patch and follow the instructions.

Message 23 of 25
Kurtpfost
Aspirant

I can no longer log into my SXR80 Router

I keep getting this error message when I try to log into my SXR80 Router    "

ERR SSL KEY USAGE INCOMPATIBLE"

 

I use Password Keeper so I know I am using the same username and password, it has worked ok since I purchased my router using my HP Desktop computer.  All of the help messages I have found on the internet has been very confusing for me. I am computer literate as I have been using them since 1983, started with a Tandy 1000 with dual 5-1/4 floppy's.

 

  My router information is:

WIFI Network Name: ORBI54
Network Key Password: Sorry Did Not Post this
Serial Number 6KW6215FA6E69
MAC: C89E43AB6AD2

Message 24 of 25
schumaku
Guru

Re: I can no longer log into my SXR80 Router

@Kurtpfost look here

Message 25 of 25
Top Contributors
Discussion stats
  • 24 replies
  • 2075 views
  • 8 kudos
  • 10 in conversation
Announcements