NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi Pro 6 SXR80 - Firmware Update V3.2.0.108 is a Disaster
Orbi Pro 6 SXR80 running in AP Mode. Firmware Update V3.2.0.108 is a Disaster. Two major issues: First Issue Updated to latest firmware V3.2.0.108 and the unit would not boot back up. Stuc...
I agree with the DNS getting hijacked. I've rolled back to 3.1.1.102 so I could see my client IPs on my DNS server instead fo the AP.
The suspect URL hijacking is most likely related to the URL filter (blacklist) feature* [plain text DNS based, 53/UDP and 53/TCP] available on Insight and active certainly on each WAC5xx and WAX6xx which spans now out to the Orbi Pro systems, too. The standalone configured WAC5xx and WAX6xx also offer the URL filter with a URL and keyword blacklist fwiw.
Based on observations, the WAC5xx and WAX6xx have this unlucky iptable config shown above (not retaining the original wireless client source IP on DNS queries) on access points with the URL filtering enabled only.
Afraid, have neither Orbi Pro nor a Orbi Pro WIFI 6 at hand to compare.
*NETGEAR Insight Basic and Premium mobile app and Insight Cloud Portal User Manual p.113 (also available on Netgear Insight Pro for the VAR and MSP arena)
There was a Beta firmware made available today -> SXK80 Beta Firmware Version 3.2.3.100 with some interesting bug fixes:
Bug Fixes
This firmware addresses the following bugs:
- Fixes DNS issues that DNS request is hijacked when clients configure static DNS server
- 512 DHCP clients support in LAN1 setting
- Fixes wrong IP assignment in VLANed networks
- Fixes wired satellite is showed disconnected in Insight webportal
Has anyone tried the beta firmware yet?
https://community.netgear.com/t5/Orbi-Pro-Beta/SXK80-Beta-Firmware-Version-3-2-3-100/m-p/2062014#M6
Installed the v3.2.3.100 firmware last night. Haven't checked for the "resolved" issues. Initial observations is that roaming and changing the wireless connections between wireless 1/VLAN1, wireless 2/VLAN2, etc. is much faster that with previous firmware revision, impressably so.
As to issues...
1- ethernet backhaul does not work with MAC ACL security enabled. All firmware revs have been dodgy with this but previously have been able to get the satellite to sync after 4 or 5 attempts. With MAC ACL turned off the satellite syncs very fast, with it on, not at all. And sync'ing first and then enabling MAC ACL breaks the link.
2-when using port 2 for the WAN connection my 1G download speed is cut in half. (this is corrected in beta v3.2.2.101)
3-the attached devices are shown, but it takes a long time before they are reported correctly. For instance after a reboot all my google home devices show up as "wired" then 20 to 30 minute later they'll get reported correctly as a wireless device.
sending now
- Those that have updated WiFiPro6 devices to official v3.2.3.100 via Insight App - a question?
Does this app update again wipe out all reserved IP addresses upon restart?
Thank you. We have made some improvement on your issues 1 & 2 .Would you be interested in trying it out and provide your feedback?
Thanks,
Raghu
- Yes, will test it.
- Will this new testing firmware be posted to the beta firmware page anytime soon? Just curious.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
