NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SXR30 Satellite using backhaul over Ethernet will not auto upgrade firmware
My SXr30 and the SXS30 that is Wireless Connected Satellite will auto upgrade firmware. But my 1 Satellite connected via Ethernet Backhaul will not seem to auto upgrade. Anyone seen this ? Rega...
Yes they cause issues we had to disable the port disabling features for the ports ORBI are connected it appears the switch see them as loops.
It took me like 3 hours to find a resources that understood the switch after it was installed and started to disable port after port that router was connected to.
Switch was supplied by VOIP contractor.
We had just old JGS524E before no issues!
Technology got to love it.
Bryan
Ya, give the IGMP protocol a try on that switch.
These switches and Orbi are kind of corner case issues. Seen this happening since Orbi 50 series. The communications between Orbi routers and the satellites seems specific and anything getting the way seems to cause problems. đ
Why we recommend non managed switches as first option to try.
Always something with tech. đ
Ok all green Ethernet disabled
L2 loops are all log only for all ports
DOS auto disabled as the switch behind FW
lets see how this works
Did you find any IGMP options on this switch?
YES I made sure every IGMP setting was disabled in the Multicast header.
Ok, hopefully that should help. Keep us posted...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
