NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Basic Config - Layer 3 Switch
I have two of the GS716v2 that I need to install in a temporary work area for employee's. About 10 people per switch plus a SonicWall SonicWave AP (only 3 users will use Wifi). These switches conn...
All these switches come out of the box with a flat L2 network config. bandwidth requirements permitting one fiber link per switch is sufficient - there you go.
I would ensure the switches are managed resp. secured. Take control, change the default password, configure a static IP or set-up a MAC-IP reservation on the DHCP server so the switches can be reached and monitored at least, configure SNMP security or disable it.
All these switches come out of the box with a flat L2 network config. bandwidth requirements permitting one fiber link per switch is sufficient - there you go.
I would ensure the switches are managed resp. secured. Take control, change the default password, configure a static IP or set-up a MAC-IP reservation on the DHCP server so the switches can be reached and monitored at least, configure SNMP security or disable it.
You mentioned disabling SNMP. To do thta change the status of the public and private entries to 'disable'?
Thanks,
Darryl
The idea was to put up secure comunity strings and not use the default public ones. Sorry for the poor wording.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
