Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Start a New Discussion
My current setup is FTTP modem powered through a POE injector and connected to my router (pfSense).
I bought a GS724TPV2 so was hoping to use this to power the modem and do away with the injector.
I have created a separate VLAN with only two ports and made them untagged.
One port connected to the modem and one port connected to my router.
However with this setup I cannot get a PPPoE connection to the ISP
I thought this would just pass the traffic straight through.
Is there something I am missing?
***** EDIT ****
Forgot to set the PVID to the VLAN ID !!!!!
All working now.
Solved! Go to Solution.
Forgot to set the PVID to the VLAN ID as above.
View solution in original post
@mikemod wrote: Forgot to set the PVID to the VLAN ID !!!!! All working now.
Please mark your post as a solution, too.
