NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
VLAN routing settings
I have configured routing on the switch as follows: The address of VLAN10 is 192.168.10.1 and VLAN20 is 192.168.20.1 The default route is the route to VLANU10 on the Internet router, that is ASUS...
Have a nice day,
NETGEAT switch I put into the factory settings, using the option in FW. I found out the factory settings using the physical button on the switch is different than the command in the switch. I uploaded a newer FW and re-configured everything, I set up static routing in the Internet router and it started to work normally ...
Hi hacesoft,
Welcome to community,
First, I guess your management vlan was "vlan 10"， Right?
Currently, VLAN 10 can access internet and vlan 20 can not.
The problem is beacuse the router did not arrive a route to VLAN20 192.168.20.0/24
You must configure a static route on your Router:
like this(see attachment): Destantion 192.168.20.0 netmask 255.255.255.0 next-hop 192.168.10.1
Hello,
thank you very much for your advice. I'll try it out until I get to it, probably on the weekend, then I know if it helped.
Thank you for any information
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
