NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 6.6 on 204 - stop working :-(
Hi to everyone. I received a bad news today. I wnt back to home and I found the readynas freezed with a "_309 out of memory" in the LSD. I transfered a lot of file with RSYNC from the 204 (backup j...
time model serial realloc_sect realloc_evnt spin_retry_cnt ioedc cmd_timeouts pending_sect uncorrectable_err ata_errors
------------------- -------------------- -------------------- ------------ ------------ -------------- ---------- ------------ ------------ ----------------- ----------
2016-05-25 18:42:51 ST3000VN000-1HJ166 W730888T 0 0 0 0 0 0 0 0
2016-05-25 19:01:26 WDC WD5000LPVX-16V0T WD-WX91A34R7287 0 0 0 -1 -1 0 0 0
2016-05-25 19:08:41 WDC WD5000LPVX-16V0T WD-WX11A34F0472 -1 -1 -1 -1 -1 -1 -1 0
2016-05-25 19:08:41 HGST HTS545050A7E680 TMA55C4T09BG4M -1 -1 -1 -1 -1 -1 -1 0
2016-05-25 19:12:34 WDC WD5000LPVX-16V0T WD-WX11A34F0472 0 0 0 -1 -1 0 0 0
2016-05-25 19:12:34 HGST HTS545050A7E680 TMA55C4T09BG4M 0 0 0 -1 -1 0 0 0
2016-05-27 13:40:59 WDC WD5000LPCX-24C6H WD-WXM1E154AF9E 0 0 0 -1 -1 0 0 0
2016-07-13 21:07:42 WDC WD30EFRX-68EUZN0 WD-WCC4N2RK7SV7 0 0 0 -1 -1 0 0 0
2016-07-13 21:07:42 WDC WD30EFRX-68EUZN0 WD-WCC4N6VD6VU4 0 0 0 -1 -1 0 0 0
2016-09-27 09:29:03 WDC WD30EFRX-68EUZN0 WD-WCC4N4DL57Y8 0 0 0 -1 -1 0 0 0
A lot of disk shuffling since May, but there is nothing concerning in the SMART stats.
You'd be getting log errors if there was a thermal shutdown. You can also monitor temps during the transfers. I don't think its thermal.
Possibilities include a failing PSU (power use certainly goes up when you are transfering data), a disk lockup, a memory problem, or some corruption in the file system, ...
There is some reason to suspect the NAS hardware, so you might want go with per-incident netgear support. There's be no charge if a warranty replacement is needed. Even if they do charge (because there problem isn't covered by warranty), that is likely the fastest way to get working again.
Thanks... I'm doing the process in netgear support. I'll write there the solution, to help future users.
I booted the NAS in Read Volume, and copied all the DATA.
I was able to do that after the changing of power setting (no auto sleep of disks after XX minutes of inactivity).
Like suggested from Tech Support, I restarted in factory default so a complete reset.
Now I'm coping all the data in the NAS and seems everything ok... I configured the NAS in the same way (before the reset), with 1 APP (Plex). I turned on, for data safety, the Dropbox backup in the cloud tab.
I hope that it will works without other surprise :-)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
