NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Duo v2 found by Raidar but cannot access
I moved last week and when I set up my readyNAs at the new location with a new ISP, Raidar sees the diveice, it's IP address, mac address, host name etc but I cannot access it in any way. Any suggest...
many thanks, StephenB and all other respondents. Got the NAS back this evening and very happy!
ringnab wrote:
I am "unable to connect" to the unit when directly connected to my PC. Any other asuggestions?
Well, I already suggested going into your router and setting its LAN addresses to 192.168.0.x. As I indicated earlier, that is the fastest solution.
On the direct-connect, did you temporarily configure the PC to use IP address 192.168.0.2, a gateway address of 192.168.0.1, and a subnet mask of 255.255.255.0? Also, you need to connect to the NAS admin page using https://192.168.0.35/admin
A third possibility is to do an OS reinstall. Before trying that, you need to confirm that you have a v2. The labeling is confusing, and many v1 owners mistakenly think they have a v2. Use this guide: http://www.rnasguide.com/2012/01/09/how-to-tell-whether-i-have-a-duo-v1-or-duo-v2-or-nv-v1-or-nv-v2/
many thanks, StephenB and all other respondents. Got the NAS back this evening and very happy!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
