NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Net Gear 3100 nas
Hi i have installed nww hdds 2tb, why am i getting a no disk detected, i have done a factrcy reset , reinstalled os, still getting this message,pleaase can some one help me (see pic)
What is the history of the NAS? Was it working with other drives installed before you put in the new ones, or did you recently acquire this with no drives?
What type of drives did you istall? I believe the backplane of the 3100 will accept SAS drives but the controller cannot utilize them.
Hi
I am using seagete sata drives. Was all working unitill I have to replace the bios battery. Now I just get no drives detected.
I am using seagete sata drives. Was all working unitill I have to replace the bios battery. Now I just get no drives detected.
You are getting a lot more than that. The IP address is the fall-over address (192.168.168.168) and the model and firmware fields are empty. But this is a RAIDiator 4.2.x system, and you really should be using RAIDar 4.3.8 to set up the NAS, not whichever version that is you are using. I'm not sure how the later RAIDar acts prior to volume creation on a 4.2.x based NAS, as I no longer have any active.
Since you are starting over, you may want to take this opportunity to convert your NAS to OS6.
- Thanks for your advice. How do I swap over to os6 then please
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
