NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
link aggregation between two NAS'?
I have a synology with 4 ports and a RN312 with 2 ports. Can I connect 2 ethernet cables directly between these 2 NAS' to speed up file transers to 2Gbps?
I bonded ports 3 & 4 in the Synology....
schumaku wrote:
Blanker-2 wrote:
What do u recommend for a NIC for the pc? Some of the dual nic cards are almost the same cost as the 10GbE nics.The Aquantia AQC-107 equipped 10 GbE 10GBase-T cards are a good choice. Avoid the Tehuti TN-4010 variants due to driver issues and sometimes average performance.
I picked up one of the ASUS XG-C100C cards when they first came out. They use the Aquantia AQC-107 controller.
schumaku wrote:10 Gb Ethernet does require to much power for mobile devices like notebooks. We can expect MultiGig (like 2.5 Gb or 2.5/5 Gb) interfaces there with newer notebook systems - so MultiGig capability on the switch, ideally some 10GBase-T and SFP+ port mix, can be key.
I get the power issue - though I'd be fine with having 10GBase-T (or MultiGig) NIC in a laptop docking station.
The most recent laptop I bought (for my wife) had no ethernet at all. There are a couple of Thunderbolt 10GBaseT adapters out there - they might be ok for a home office.
The switches are still very expensive - around 10x more than gigabit. That will certainly limit the number of 10GBase-T ports I deploy.
StephenB wrote:
schumaku wrote:
Blanker-2 wrote:
What do u recommend for a NIC for the pc? Some of the dual nic cards are almost the same cost as the 10GbE nics.The Aquantia AQC-107 equipped 10 GbE 10GBase-T cards are a good choice. Avoid the Tehuti TN-4010 variants due to driver issues and sometimes average performance.
I picked up one of the ASUS XG-C100C cards when they first came out. They use the Aquantia AQC-107 controller.
schumaku wrote:10 Gb Ethernet does require to much power for mobile devices like notebooks. We can expect MultiGig (like 2.5 Gb or 2.5/5 Gb) interfaces there with newer notebook systems - so MultiGig capability on the switch, ideally some 10GBase-T and SFP+ port mix, can be key.
I get the power issue - though I'd be fine with having 10GBase-T (or MultiGig) NIC in a laptop docking station.
The most recent laptop I bought (for my wife) had no ethernet at all. There are a couple of Thunderbolt 10GBaseT adapters out there - they might be ok for a home office.
The switches are still very expensive - around 10x more than gigabit. That will certainly limit the number of 10GBase-T ports I deploy.
Late reply but for new readers: Re: Asus XG-C100C, I learned the hard way that it does not support WakeOnLAN (WOL). Asus states it plainly on their product support page FAQ (of course I didn't read that until I bought/installed the card and chased Windows forums for 2 hours trying to figure out why WOL options were all grayed out). An Amazon customer says Asus Customer Service confirmed it's a HW limitation of the card. The Aquantia 10GB NIC card does support WOL, so if that matters to you, suggest to go with Aquantia NIC.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
