- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: OS 6.5.2 still causes fan issues on the PRO 6, like OS 6.5.1 but unlike OS 6.5.0
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You could try
# echo 1000 > /etc/frontview/min_fan_speed_override
# systemctl restart readynasd
as a temporary workaround. This forces the NAS to aim for a higher minimum fan speed of 1000 RPM which may be necessary for some fans.
This is a change you can easily reverse by removing the override file and restarting readynasd.
Edit: Now that 6.6.0 is available you may wish to try that.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: OS 6.5.2 still causes fan issues on the PRO 6, like OS 6.5.1 but unlike OS 6.5.0
Went back to OS 6.5.0 and it seems the quiet setting on 6.5.0 does not go under 907 RPM, where as 6.5.2 slows down to 555 RPM which creates the warning.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: OS 6.5.2 still causes fan issues on the PRO 6, like OS 6.5.1 but unlike OS 6.5.0
I think a possible fix was committed to the 6.6.0 branch but not to 6.5.2.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: OS 6.5.2 still causes fan issues on the PRO 6, like OS 6.5.1 but unlike OS 6.5.0
Thanks.
I'm a bit reluctant to verify this as I understand I cannot go back to 6.5.0 once upgraded to 6.6.0. And as I shared in another thread, the PRO 6 fans work absolutely GREAT on 6.5.0.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You could try
# echo 1000 > /etc/frontview/min_fan_speed_override
# systemctl restart readynasd
as a temporary workaround. This forces the NAS to aim for a higher minimum fan speed of 1000 RPM which may be necessary for some fans.
This is a change you can easily reverse by removing the override file and restarting readynasd.
Edit: Now that 6.6.0 is available you may wish to try that.