NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
GS105PE PoE Daisy Chain
Hi, I need (or rather want :smileyvery-happy:) to install two switches in a place where there is no power. My existing network consists of an ASUS WiFi Router and not much else. My plan is as follows: Run power + data via a PoE+ Injector to the first GS105PE Run the second GS105PE off of PoE Passthrough from the first GS105PE Only run data (no power) from the rest of the available ports (PoE only needed to power the switches themselves). I hope this mockup will explain my theory: Will this work? Thanks in advance.Orbi Query - Will an extra third “bridge” satellite help with daisy chain and overall wifi speed imp
In my current setup I have the Orbi router in the living room, then a satellite each in the bedrooms with closed doors. This is setup using daisy chain topology. I’m in India so we have a lot of interference within our walls and environment. The satellite signal in the “attached devices” page of the setup via the Orbi Desktop Login says "GOOD" for both satellites, but keeps dropping out at intervals. Wondering if I place an extra third satellite in the small bridge hallway between the living and the rooms, would the signals and speed improve for wifi overall across the home? Please reference attached floor plan layout of my home to understand how the router and satellites are setup. I’ve marked the third potential satellite placement as SAT 3 bang in the middle of the main router and the other two satellites. I’m running the latest firmware 2.1.1.16 for my device. Thank you.Daisy chain two X6S (EX8000) wifi extenders
I am wishing to daisy chain two EX8000 extenders. I am hoping to use the "mesh" features that this model seems to have. There seems to be a backchannel on the extender. Orbi type features. Does this back channel also get utilized by the second daisy chained extender #2 to the first extender #1? Also, could i daisy chain another model of Netgear extender to the EX8000? I have a EX6200 (ac1200) unit that i would like to try to connect to the EX8000. I also cannot find any documentation on how to do this either. Thanks.
