NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Can I use LB1120 on a GSM network?
I have a couple of solar power installations in Haiti. I would like to monitor them over the internet. Can I use this device on the Digicel or Natcom network? I believe both networks are GSM. I would, of course, obtain a SIM card in Haiti. I do not have WiFi available at the sites, and I would need a cellular connection for a wired internet connection. (The required data rate and volume are quite low. The device being monitored will be connected using Outback's Optics RE.)PBR Policy Based Routing using Managed Switch
I am no expert with networks, but I am wondering if anyone has had any experience with PBR (Policy Based Routing) using Netgear Managed Switches. More specifically I am wanting to define the onward hop based upon the source IP. Looking through the manual, I can't find any insights on how to implement it using the web application. So to give an example: Message received on port 1 from source IP 192.168.254.1/24, with destination 172.168.0.1/24 I would like to define the next hop to be an interface with IP 192.168.1.1/24 (connected to port 2) Another message received on port 1, source: 192.168.254.2/24, same destination IP. I would like to define the next hop to be an interface with IP 192.168.2.1/24 (connected to port 3) and so on. Is this possible? Any help or suggestions would be much appreciated. Thanks