NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Netgear R7800 ethernet port speed max 100Mbps
Is about a Nighthawk(R) X4S R7800 firmware version V1.0.2.40 Although a gigabith ethernet connection from the modem is connected to the wan port and a gigabit switchport is connected to ethernet LAN port 1, both show a maximum of 100Mb. Also the connected Gigabit switch port shows a maximum of 100Mb. (connecting other gigabit devices on the switcvh port show a 1Gbps speed) According to the specs , the ethernet ports of the R7800 are 1Gbps. What can be the cause that the bandwidth is max 100Mbps ? router status / internetport statistics:
R8500 - VLAN Management
Hello I'm new to the forum and hopefully won't make mistakes in creating the discussion. Due to the fact that a SYNOLOGY NAS that I've just bought has some issue at keeping ibernation, I'm now in need of setting up some sort of sub-network in my own LAN to keep devices such as phones and domotic tools in control, so to prevent their broadcast packages to reach my NAS and eventually stopping it from waking up from ibernation. As far as I can see, this can be done via VLAN - But I can't figure out how to make it work on my router (R8500 Nighthawk) Before going on with the explanation, every device on my network is connected directly to the Router, let the connection be wired or wireless, without any sort of switch in the middle so won't have to worry about Layer 3 setups. I would need to put Ports 1, 4, 6 + WiFi 2.4, 5.1 and 5.1(2) into a VLAN with free internet access, while other ports should be on an internal network with internet access but no way to see other devices or to get packets from them. Is this possible? If yes, is there a way to put my PC on port 1 in condition of seeing both VLANs (that ain't a 'must' - but would be easier for me)? Thanks in advanceLosing Wireless Connectivity
Hello guys, So basically the first few days the Orbi system worked just fine. But now I'm losing the connection every 1/2 hrs. I'm connected via Lan-Cable to my PS4. I don't know if it has something to do with my issue but when I was only using the laptop and my iPhone everything worked fine. I did not change any settings etc. Once I lose connection the router is pulsing white and sometimes it's just solid white. Then it turns blue and everything works again. Any ideas how I could solve this? I don't want my router to lose connection. Especially when I'm playing online games.Satellte LAN ports not working?
I've got my router in the basement and the satellite above it on the main level to cover the 3rd floor. Satellite is connected with devices attached, but when I plug anything into the LAN ports, they don't get an IP. I requested a replacement kit from Amazon and got the new one set up, tested the LAN ports with the satellite 2 feet from the router once I got the router/satellite configured and the firmware updated on both to 1.4.0.18. Worked fine. Moved the satellte up to the middle floor, got it connected, devices attached through wifi...LAN ports not working again. My Arlo base station showed up on the wired list, but the Xbox One S and the blu-ray player won't connect via LAN. Did a bit of looking around and doesn't seem like anyone else has had the issue? I figure it's either software at this point since it's 2 different kits or I've got something configured wrong.
