NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
I want to block my TV from accessing internet but still allow LAN access
Hi, I have a few devices I want to block from accessing the Internet but still allow them local network access. I understand I can block specific port numbers or assign dummy DNS addresses on specific devices... all of which are decent workarounds. But is it possible to just simply tell my router to block WAN access for a specific device IP/MAC address or somthing similar? -Pete
Netgear R7800 ethernet port speed max 100Mbps
Is about a Nighthawk(R) X4S R7800 firmware version V1.0.2.40 Although a gigabith ethernet connection from the modem is connected to the wan port and a gigabit switchport is connected to ethernet LAN port 1, both show a maximum of 100Mb. Also the connected Gigabit switch port shows a maximum of 100Mb. (connecting other gigabit devices on the switcvh port show a 1Gbps speed) According to the specs , the ethernet ports of the R7800 are 1Gbps. What can be the cause that the bandwidth is max 100Mbps ? router status / internetport statistics:POE for GS305P
Can the GS305P switch be powered for its own internal functions by its LAN connection to a POE network switch? I need to split an ethernet connection to two to four desktop PC's, and have a client insisting on a ceiling-mounted data cable reel. There will not be any free outlets to plug in the switch. They are all being used by the actual PC's, montitors, etc. I'm trying to avoid installing a separate reel for each data connection.Losing Wireless Connectivity
Hello guys, So basically the first few days the Orbi system worked just fine. But now I'm losing the connection every 1/2 hrs. I'm connected via Lan-Cable to my PS4. I don't know if it has something to do with my issue but when I was only using the laptop and my iPhone everything worked fine. I did not change any settings etc. Once I lose connection the router is pulsing white and sometimes it's just solid white. Then it turns blue and everything works again. Any ideas how I could solve this? I don't want my router to lose connection. Especially when I'm playing online games.Oribi Need FW update to block internet access without killing Network access
Currently, if I pause the Internet for a device through the NETGEAR Genine it makes that select device unavailable to my local area network. I would like to request a firmware feature to block specific devices from going outside the local area network. I have many devices on my LAN that do not need Internet access, but still need to function on my LAN as a network device. Have WAN access should be a ON/OFF option for a device in the phone App, as well as the browser interface. Thanks Doug in Michigan ---------------------------- FW version: RBR50 / RBS50 Firmware Version 1.11.0.20 14 connected devices. OS: Windows 10 Creative ISP Comcast at 150mbps 2,200 sq ft ranch open floor plan. Router and Sat. about 45 ft a part. (one wall)Satellte LAN ports not working?
I've got my router in the basement and the satellite above it on the main level to cover the 3rd floor. Satellite is connected with devices attached, but when I plug anything into the LAN ports, they don't get an IP. I requested a replacement kit from Amazon and got the new one set up, tested the LAN ports with the satellite 2 feet from the router once I got the router/satellite configured and the firmware updated on both to 1.4.0.18. Worked fine. Moved the satellte up to the middle floor, got it connected, devices attached through wifi...LAN ports not working again. My Arlo base station showed up on the wired list, but the Xbox One S and the blu-ray player won't connect via LAN. Did a bit of looking around and doesn't seem like anyone else has had the issue? I figure it's either software at this point since it's 2 different kits or I've got something configured wrong.
