NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
NMS300
4 Topics
FS728TPv2 MIB files. Enable/disable POE admin mode via NMS300
Hi, We currently have 50 FS728TPv2 switches and are used to power electronic locks. We would like to know if there is a MIB file for the FS728TPv2 where it would be possible to cut the POE of a specific port via SNMP. I saw there are a few private netgear MIB's on NMS300, but none of them worked. I've also googled around but nothing came up. Any help would be apreciated. Thanks,Solved1.8KViews0likes3CommentsBackup via NMS300 stopped working after firmware update on M4300 switches
Hi All, I have multiple M4300 switches, SRX5308 firewalls and WC7600 controllers. I automatically backup configuration of all these devices via NMS300. Recently I updated firmware on all switches to the latest version (12.0.2.15). Since the upgrade my scheduled backups stopped working and I get an error "File Transfer Failed". Backups of the SRX5308 firewalls and WC7600 controllers still work. I tried switching "File Server Settings" from local to remote server as per NETGEAR recommendations but it does not help. Anyone experienced a similar issue? Any help would be much appreciated. Regards, Max.3.8KViews0likes7CommentsNMS300 config backup with telnet disabled?
Hello everybody, we would like to use NMS300 to save the config of our 40 Netgear Switches automatically every night, but it seems that this requires telnet to be enabled on all switches. Is this by design or did I miss something? Transmitting a password for administrative access in cleartext over the network isn't best practice - to say the least... Any thoughts? Thanks in advance! Kind Regards ChristophSolved5.5KViews0likes5CommentsNMS300 and S3300
Dear Community, I have installed NMS300 (latest) and discovered some devices, also created new device credentials. It is working so far except one issue, maybe it is config related. My S3300-52X-PoE+ is detected in Device Discovery but not added to inventory. Current device status is "Some stack member is empty" stated in NMS Device Discovery Results. Device name, IP address and model is displayed also. Is it possible to add devices only in "clean" state? It is not mentioned in the manual. Thanks in advance, RaphaelSolved