NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
GS105PE - PoE Passthrough issue with Unifi Switch
Hi, I have a Unifi USW-8P-60 switch powering my GS105PE which works fine. However PoE Passthrough seems to be an issue, the LED on Port 1 keeps blinking and it doesn't power my Access Point which is PoE capable. Port 5 is showing an amber LED so should be able to power a bit over 7W according to the spec sheet. The AP I'm attaching uses 3-4W. The strange thing is that it worked when I upgraded the GS105PE to the latest firmware (v 1.5.0.4) but as soon as I had to reboot after I needed to install the new boot loader, it stopped working again. Kind regards, WesleyProSafe M4100-24G (GSM7224P) EPS POE
Does anyone have experience using the GSM7224P switch with the RPS4000 in EPS mode? The switch will seemlessly switch to the RPS if I pull the main power but seems unable to use the RPS4000 in EPS mode to get the 720W POE budget specified in the documentation. I've got the A/B switch on the back of the RPS4000 set to A, as specified in the manual, but other documentation seems to indicate that A is RPS mode and B is EPS mode. But, I didn't see any change when it was set to B either. Does anyone know what I have to do to get to the full 720W POE budget? Thanks