NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Powerline HDX Internet Just Stopped Working
Mac osx 10.12.6 Router Netgear N600 WNDR34500 I have a direct line from the router to my Mac, but I use my powerline for my home theater system in the other room via converted router to switch. I also have a single block XAV 101v2 which I picked up at a thrift shop that works, but I havent been using it. I've check pretty much everything I need to check to see if the rest of the system works and it does, but I only get the power and the ethernet lights to work on the blocks. Checked, cables, outlets from different room. The only thing I cant check is where I put in the original line to the wall from the router. Any suggestions? I went to work yesterday and everything worked fine, but when I came home the blocks werent working.Cannot reset the wifi settings
I seemed to have lost the wifi extension from my AV200 powerline adapter. I have reset it (and the initial unit) and checked their encryption but using the Powerline Utility I keep getting a message that says 'wifi setting failed' when I try to complete that action. Any clues would be fab - all lights are opn and the utility says that the connections are good ???Powerline PLW 1000 clone router?
Maybe I am not using the correct term here, but my intention when I bought this was to have essentially an extension of my router to the other side of my apartment. My issue I have right now using the powerline is since it creates its own wifi signal, everytime I switch where I am located my phone will stay connected to where I was before, so then I have to go to my settings and change my phone so it is connected to my Powerline (or router, depending on the room). For instance, I can be in room A on one side of the apartment and be connected to the router with a solid connection with WIFI_A. However when I leave that room and go to the opposite side of my apartment my phone remains connected to WIFI_A and I have to manually switch it to the Powerline adapter's wifi, WIFI_B. Is there a way to use the PLW1000 so that it is the SAME as my router, meaning I can go from one room to another to where the other device is located and stay connected to the same network and not have to change it? Meaning I can connect to WIFI_A and have that signal be both from the router AND powerline? Any advice/help would be greatly appreciated! Thanks! -AndyPowerline adapters outdoor, water proof?
Hi community, I want to place a powerline (with WIFI capability built in) just outside my house. Although there is some kind of roof above it, it will still get wet from the rain. So I would like to know if the powerline adapters from Netgear are water resistant (at least rain resistant) or not. I was mainly looking at the "PLW1000". Thank you for the info.
PLW1000 turns on lamp
When I plug in and power up the PLW1000 it triggers the touch lamp that's on the same circuit. Here's what I know and/or have tried. putting a magnet clip-on thing onto the lamp's cord no different circuits in the room. Just the one. moved the PLW1000 to a different room (different circuit) and it works fine but range is not as good. Any idea how to resolve this? Thanks